ENAE 410

"This one will be much harder than the practice final"

31 flashcards · Other · by Dylan Matwe

  1. Slats Adding increases stall angle of attack increases cl max

  2. Leading Edge Flaps Increases Clmax increases α stall

  3. Flaps that increase Wing area

  4. What is the purple one?

    Slotted Flap Air bleeding through delays seperation (acts like a slat)

  5. Flaps, Increase lift by changing chape. Increases Clmax, decreases α a Clmax

  6. What direction does the Horizontal Stab provide stability in

    roll

  7. Empenage

    Tail Section

  8. Name of axis along the wings

    Lateral Axis - Pitch Positive is Nose up

  9. Axis going down

    Vertical Axis - Yaw Positive turning right

  10. Axis going forward

    Vertical Longitutinal - Roll Positive rolling right

  11. What direction does the rudder provide stability in

    yaw

  12. Red

    Root Chord

  13. Blue

    Tip Chord

  14. Green + Purple

    1/4 chord line and 1/4 point

  15. Taper Ratio

    Ratio between the root chord and the tip chord

  16. Aspect Ratio

    Measure of wingspan to chord length AR=b2/SwAR = b^2/S_wAR=b2/Sw​

  17. Dihedral angle

    Measure of the wings relative to the horizontal

  18. Red

    Camber Line

  19. Blue

    Thickness

  20. What type of drag is associated with attached flow

    Friction Drag

  21. What type of drag is associated with detached flow?

    Presure Drag

  22. What type of airfoil is the purple line?

    Cambered

  23. What type of airfoil is red?

    Symetric

  24. Where does induced drag come from?

    Comes from the air velocity of the downwash changing the net flow direction, and pointing the resultant lift vector back (always normal to the air speed vector)

  25. What does a C_d vs M graph look like?

  26. What does a ClC_lCl​ vs MMM graph look like?

  27. When is speed constrained by ClmaxC_{l max}Clmax​

    When we are below nmaxn_{max}nmax​

  28. When does induced drag dominate?

    Low Speeds

  29. When does parasitic drag dominate?

    At High Speeds