sewing 101
52 flashcards · Other · by SHIRREH
what is interfacing
its a fabric thats used to hold shape like for collors or waistbands etc facing is anywhere near a hole like an arm hole collar etc also
what fabric will we test in
what fabric will we test in
sleeves
you always have to do 3-4 folds etc to stitch and professionals do a running stitch on top of that also
shoulder dart slash and spread method
SHORT STRAP
length=20 inch + 1 inch seam allowance width=2.5 inch
Seam allowance for collars neckline and facing
1/4 inch
seam allowance
stitching gap usually .5 inches as standard
pattern notches
they tell you where to start and end your stitch it tells you the order of the stitch it will also be at the end of dart legs when it has lots of curves add lots of notches so you know where to stop and move it
metric of patterns
inches
long strap
length= 25 inch + 1 inch width=4inch + 1 inch
how to transfer pattern to fabric
how to put pattern on the otherside of the fabric
put carbon paper facing the up of the fabric,draw with tracing wheel on top sewing lines of fabric
how to do running stitch
first when you need to lock the stitch,by doing reverse to the back 2 times then stitch straight down and in the lock it too with the reverse stitch 2 times
drillholes
dots with circle used for darts,pockets,button
corners square and circle
you need to stitch straight down in sqaure,when you reach a corner lift presser foot not the needle and turn it towards stitching direction for circle,you just need to stop a lot and turn it
bust dart
its like wrapping a gift on a ball when you sew the 2 edges together it turns it into bowl shape apex is fullest point of bust you need 2.5cm down of apex=standard
french dart
side bust dart
armhole dart
midshoulder dart
neckline dart
centre front neck dart
how to sew the pocket
how to do the straps
how to make it reversible
pleat
how to sew pleats
fold notch to notch
tucks
knife pleats
box pleats
inverted box pleats
pleated skirt gap
gathers
princess bodice
princess bodice back
front bodice with empire waist and gathers
back bodice with empire waist
traditional patch pocket
shaped patch pocket
inset pocket
inseam pocket
steps of drafting a skirt
make the skirt block lower or raise the waistline choose the waistline finish add the flares
type of waistbands
straight waistband facing waistband yoke waistband contoured waistband
straight waistband
facing waistband
yoke waistband
countoured waistband
types of flares
pencil style lines gathers pleats
pencil
style lines
gathers
pleats