GE8152 - Engineering Graphics - Unit - I

50 flashcards · Other · by Premkumar Sampathkumar

  1. Two points are placed in 1st quadrant of projection planes such that the line joining the points is perpendicular to profile plane the side view and top view will be ______________ a) single point, two points b) two points, single point c) single point, single point d) two points, two points

    b) two points, single point

  2. A point is 8 units away from the vertical plane and 2 units away from profile plane and 4 units away from horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the side view and front view of point is _______________ a) 12 units b) 6 units c) 10 units d) 8 units

    a) 12 units

  3. A point is 15 units away from the vertical plane and 12 units away from profile plane and horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the front view and top view of point is ______________ a) 27 b) 15 c) 12 d) 24

    c) 12

  4. A point is in 2nd quadrant 20 units away from the horizontal plane and 10 units away from the vertical plane. Orthographic projection is drawn. What is the distance from point of front view to reference line, top view point to reference line? a) 20, 10 b) 10, 20 c) 0, 20 d) 10, 0

    b) 10, 20

  5. A point is in 2nd quadrant, 15 units away from the vertical plane, 10 units away from the horizontal plane and 8 units away from the profile plane. Orthographic projection is drawn. What is the distance from point of front view to point of top view? a) 5 b) 2 c) 7 d) 8

    d) 8

  6. A point in 2nd quadrant is 25 units away from both the horizontal plane and profile plane 15 units away from the vertical plane. Orthographic projections are drawn find the distance from the side view and top view. a) 40 b) 50.99 c) 33.54 d) 41.23

    a) 40

  7. A point is in 2nd quadrant which is 5 meters away from horizontal and 3 meters away from profile plane. Orthographic projections are drawn. What is the distance from the top view to xy reference line? a) 5 b) 3 c) 8 d) Can’t found

    a) 5

  8. A point is in 2nd quadrant which is 8 meters away from horizontal and 6 meters away from profile plane. Orthographic projections are drawn. What is the distance from the top view to xy reference line? a) 5 b) 3 c) 8 d) Can’t found

    d) Can’t found

  9. Two points are placed in 3rd quadrant of projection planes such that the line joining the points is perpendicular to vertical plane the side view and top view will be _______________ a) single point, two points b) two points, single point c) single point, single point d) two points, two points

    a) single point, two points

  10. A point is 9 units away from the vertical plane and 5 units away from profile plane and 4 units away from horizontal plane in 3rd quadrant then the projections are drawn on paper the distance between the side view and front view of point is ____________ a) 12 units b) 14 units c) 10 units d) 8 units

    b) 14 units

  11. A point is 20 cm away from the vertical plane and 8 units away from profile plane and 17 cm away from horizontal plane in 3rd quadrant then the projections are drawn on paper the shortest distance from top view and side view of point is _______________ a) 37 b) 44.65 c) 46.40 d) 37.53

    d) 37.53

  12. A point is in 4th quadrant 15 cm away from the vertical plane and 10 cm away from the horizontal plane. Orthographic projection is drawn. What is the distance from point of front view to reference line, top view point to reference line? a) 15, 10 b) 10, 15 c) 0, 15 d) 10, 0

    a) 15

  13. A point is in 4th quadrant, 15 dm away from the vertical plane, 10 dm away from the horizontal plane and 8 units away from the profile plane. Orthographic projection is drawn. What is the distance from point of front view to point of side view? a) 25 b) 23 c) 18 d) 5

    b) 23

  14. A point in 4th quadrant is 8 inches away from the horizontal plane and 20 inches away from both the vertical plane and profile plane. Orthographic projections are drawn find the distance from side view and top view. a) 41.76 b) 20 c) 43.08 d) 16

    c) 43.08

  15. A point is in 4th quadrant which is 15 inches away from horizontal and 30 inches away from profile plane. Orthographic projections are drawn. What is the distance from the top view to xy reference line? a) 5 b) 3 c) 8 d) Can’t found

    d) Can’t found

  16. A line of length 15 cm touching the vertical plane and perpendicular to it held at a distance of 20 cm away from horizontal plane and 5 cm away from the profile plane. Which of the following is false? a) Front view will be point b) The line is parallel to horizontal and profile plane c) The length of the line in side view is 15 cm d) One end of line is on the horizontal plane

    b) The line is parallel to horizontal and profile plane

  17. A line of length 7 m touching the vertical plane and perpendicular to it at a distance of 2 m away from horizontal plane and 5 m away from the profile plane. Which view gives the distance from line to horizontal plane is 2 m? a) Front view b) Left side view c) Top view d) Right side view

    c) Top view

  18. A line is perpendicular to profile plane, the perpendicular distance from the line to vertical plane is 10 cm and perpendicular distance from the line to horizontal plane is 5 cm. What is the distance from the line to vertical reference line if it is viewed from a side view? a) 10 cm b) 5 cm c) 7.5 cm d) 0 cm

    a) 10 cm

  19. A line of length 10 cm parallel to horizontal plane and inclined to vertical plane with an angle of 25 degrees. What is the length in front view? a) 10 cm b) 0 cm c) 9.06 cm d) 4.22 cm

    d) 4.22 cm

  20. A line AB of length 20 cm is placed in 1st quadrant and parallel to profile plane and the end A and B are 15, 10 cm away from the horizontal plane respectively. The length of the line in the top view is ______ cm. a) 11.18 b) 13.2 c) 17.32 d) 19.36

    a) 11.18

  21. A line of length 16 cm is parallel to horizontal plane and makes an angle of 30 degrees with vertical plane placed in 3rd quadrant. The length of line in front view is ____ cm. a) 32 b) 16 c) 13.8 d) 8

    b) 16

  22. A line of length 10 cm at first lied on the horizontal plane parallel to vertical plane and then keeping one of its ends fixed turned 30 degrees with respect to vertical plane and then turned 45 degrees with respect to horizontal plane. What is the length of line in top view? a) 5 cm b) 7.07 cm c) 3.53 cm d) 10 cm

    b) 7.07

  23. A line of length 15 cm at first lied on the vertical plane parallel to horizontal plane and then keeping one of its ends fixed turned 30 degrees with respect to horizontal plane and then turned 50 degrees with respect to vertical plane. What is the length of the line in top view? a) 9.6 cm b) 7.5 cm c) 12.99 cm d) 11.49 cm

    a) 9.6 cm

  24. A line of length 20 cm at first lied on the profile plane parallel to the vertical plane and then keeping one of its ends fixed turned 40 degrees with respect to vertical plane and then turned 20 degrees with respect to profile plane. What is the length of the line in side view? a) 18.79 cm b) 6.8 cm c) 12.85 cm d) 15.32 cm

    d) 15.32 cm

  25. A line of length 25 cm at first lied on the profile plane parallel to horizontal plane and then keeping one of its ends fixed turned 55 degrees with respect to horizontal plane and then turned 65 degrees with respect to profile plane. What is the length of the line in top view? a) 22.65 cm b) 10.56 cm c) 14.33 cm d) 20.47 cm

    a) 22.65 cm

  26. Oblique planes come under ________________ a) planes perpendicular to both reference planes b) planes perpendicular to one reference plane and inclined to other reference plane c) planes inclined to both the reference planes d) planes parallel to one reference plane and perpendicular to other reference plane

    b) planes perpendicular to one reference plane and inclined to other reference plane

  27. The planes which are perpendicular to both the reference plane (horizontal and vertical) are visible clearly only if we watched from ___________ a) front view b) top view c) side view d) isometric view

    d) isometric view

  28. A square is held 30 degrees with horizontal plane and turned 30 degrees with respect to vertical plane keeping earlier condition constant. The top view will be ________________ a) line b) square c) rectangle d) parallelogram

    a) line

  29. A triangle is placed perpendicular to both the reference planes (horizontal and vertical plane) which of the following statement is true. a) Front view-line, top view- triangle b) Front view-triangle, top view- line c) Front view –line, top view-line d) Front view-triangle, side view- line

    a) Front view-line, top view- triangle

  30. A plane parallel to vertical plane then which of the following is false statement. a) vertical trace will not present b) horizontal trace is parallel to xy c) front view give true shape and size d) top view give true shape and size

    b) horizontal trace is parallel to xy

  31. A square of side 10 cm is held parallel to vertical plane and one diagonal is perpendicular to xy reference plane. The length of line in top view will be ________ a) 10 cm b) 14.14 cm c) 7.07 cm d) 0 cm

    b) 14.14 cm

  32. A pentagon is placed parallel to horizontal plane which of the following projection is true? a) Front view-line, top view- pentagon b) Front view- pentagon, top view- line c) Front view –line, top view-line d) Top view- line, side view- line

    a) Front view-line, top view- pentagon

  33. An equilateral triangle of side 10 cm is held parallel to horizontal plane and base is parallel to xy reference line. The length of line from side view will be _____ a) 8.66 cm b) 10 cm c) 0 cm d) 12.47 cm

    c) 0 cm

  34. The top view, front view and side view of a triangle parallel to vertical plane, circle parallel to profile plane and rectangle parallel to horizontal plane respectively are ___________ a) line, circle, line b) triangle, line, rectangle c) triangle, line, line d) line, line, line

    a) line, circle, line

  35. When a plane is perpendicular to one plane and inclined to other reference planes then the projections are obtained in 2 stages. a) True b) False

    b) False

  36. A Square is placed perpendicular to vertical plane and inclined to horizontal which of the following is true? a) Front view-line, top view- square b) Front view- line, top view- rectangle c) Front view –line, top view-line d) Top view-line, side view- rectangle

    c) Front view –line, top view-line

  37. A circle is placed perpendicular to vertical plane and inclined to horizontal which of the following is true? a) Front view-line, top view- circle b) Front view- circle, top view- circle c) Front view –line, top view-line d) Top view- ellipse, side view- ellipse

    b) Front view- circle, top view- circle

  38. A pentagon is placed perpendicular to horizontal plane and inclined to profile plane which of the following is true. a) Front view-line, top view- pentagon b) Front view- pentagon, top view- line c) Front view –line, top view-line d) Top view-line, side view- line

    c) Front view –line, top view-line

  39. A hexagon is placed perpendicular to profile plane and inclined to horizontal plane which of the following is true. a) Front view-line, top view- hexagon b) Front view- hexagon, top view- line c) Front view –line, top view-line d) Top view-hexagon, side view- line

    a) Front view-line, top view- hexagon

  40. When a surface of the plane is inclined to the H.P and an edge is parallel to the H.P and inclined to V.P. The projections are drawn in 2 stages. a) True b) False

    b) False

  41. A square is placed in between the reference planes in such a way that one diagonal is inclined to H.P and another diagonal inclined to V.T. Projections are drawn. The front views in 1, 2 and 3 stages are _______ _________ and __________ respectively. a) line, line, parallelogram b) line, parallelogram, line c) square, line, parallelogram d) square, rhombus, rhombus

    c) square, line, parallelogram

  42. A rectangular plane surface of size 60 x 30 cm is positioned in the first quadrant and is inclined at an angle of 60 degrees with the H.P and 30 degrees with the V.P. The front views while drawing projections in 1, 2 and 3 stages are _______ _________ and __________ respectively. a) line, line, parallelogram b) line, parallelogram, line c) rectangle, square, square d) rectangle, square, parallelogram

    b) line, parallelogram, line

  43. An equilateral triangle is positioned in the first quadrant and is inclined at an angle of 30 degrees with the H.P and 30 degrees with the V.P. The front views while drawing projections in 1, 2 and 3 stages are _______ _________ and __________ respectively. a) line, equilateral triangle, line b) line, line, scalene triangle c) equilateral triangle, isosceles triangle, isosceles triangle d) equilateral triangle, isosceles triangle, scalene triangle

    d) equilateral triangle, isosceles triangle, scalene triangle

  44. A rectangular plate of sides 60 x 30 cm has its shorter side in the V.P, inclined to 60 degrees with V.P and 30 degrees with the H.P. The top view while drawing projections in 1, 2 and 3 are ______ ________ and ________ respectively. a) line, line, parallelogram b) line, parallelogram, line c) rectangle, square, square d) rectangle, square, parallelogram

    a) line, line, parallelogram

  45. A circular surface plane is making 30 degrees with both H.P and V.P. The front view will be _________ a) line b) circle c) oval d) ellipse

    a) line

  46. A rectangular plane surface of size 60 x 30 cm is positioned in the first quadrant and is inclined at an angle of 60 degrees with the H.P and 30 degrees with the V.P. The top views while drawing projections in 1, 2 and 3 stages are _______ _________ and __________ respectively. a) line, line, parallelogram b) line, parallelogram, line c) rectangle, square, square d) rectangle, square, parallelogram

    a) line, line, parallelogram

  47. If a square is placed on its base parallel to horizontal plane, and plane containing square is perpendicular to horizontal plane and inclined to vertical plane then the top view gives a line of length equal to side of square. a) True b) False

    b) False

  48. A plane is perpendicular to vertical plane and vertical trace of a plane is making 55 degrees with the xy plane. Which of the following is false? a) The plane is inclined 55 degrees with the horizontal plane b) Front view gives a line c) Top view gives true shape of plane d) Horizontal trace is perpendicular to xy plane

    a) The plane is inclined 55 degrees with the horizontal plane

  49. A square of side 10 cm is held parallel to vertical plane and one diagonal is perpendicular to xy reference plane. The length of line in top view will be ________ a) 10 cm b) 14.14 cm c) 7.07 cm d) 0 cm

    c) 7.07 cm

  50. While drawing projections if a triangle is parallel to horizontal plane, top should be drawn first and projections are drawn to it to get front view. a) True b) False

    a) True