GE8152 - Engineering Graphics - Unit - III

50 flashcards · Other · by Premkumar Sampathkumar

1. The minimum number of orthographic view required to represent a solid on flat surface is _________ a) 1 b) 2 c) 3 d) 4

   B

2. C

3. When a pyramid or a cone is cut by a plane parallel to its base, thus removing the top portion, the remaining portion is called ___________ a) cylinder b) frustum c) prism d) polyhedron

   B

4. Straight lines drawn from the apex to the circumference of the base-circle are all equal and are called ____________ a) edges b) connecting lines c) projectors d) generators

   D

5. If a solid is positioned that its axis is perpendicular to one of the reference plane. Which of the following is false? a) Axis is parallel to other reference plane b) Base is parallel to reference plane c) Projection on that plane gives true shape of its base d) Base is perpendicular to horizontal plane

   D

6. If a solid’s axis is perpendicular to one of the reference planes then the projection of solid on to the same plane gives the true shape and size of its ___________ a) lateral geometry b) base c) cross-section d) surface

   B

7. When the axis of solid is perpendicular to H.P, the ______view should be drawn first and ____ view then projected from it. a) front , top b) top, side c) side, front d) top, front

   D

8. When the axis of solid is perpendicular to V.P, the ______view should be drawn first and ____ view then projected from it. a) front , top b) top, side c) side, front d) top, front

   A

9. When the axis of solid is parallel to H.P &V.P, then ______view should be drawn first and ____ and _______view then projected from it. a) front , top, side b) top, side, front c) side, front, top d) top, front, side

   C

10. The front view, side view and top view of a regular square pyramid standing on horizontal plane base on horizontal plane. a) triangle, triangle and square b) square, triangle and triangle c) square, triangle and square d) triangle, square and triangle

    A

11. The side view, top view and front view of a regular hexagonal pyramid placed base parallel to profile plane. a) Triangle, triangle and hexagon b) hexagon, triangle and triangle c) hexagon, triangle and hexagon d) triangle, hexagon and triangle

    B

12. The side view, top view and front view of a regular pentagonal prism placed axis perpendicular to vertical plane. a) rectangle, rectangle and pentagon b) pentagon, rectangle and rectangle c) pentagon, rectangle and pentagon d) rectangle, pentagon and rectangle

    A

13. D

14. C

15. When a solid is placed such that axis is inclined with the V.P and parallel to the H.P. Its projections are drawn in ___________ stages. a) 1 b) 4 c) 2 d) 3

    C

16. A regular cone first placed in such a way its axis is perpendicular to V.P and next this is tilted such that its base is making some acute angle with V.P. The top view for previous and later one will be. a) Triangle, triangle b) irregular shape of circle and triangle, triangle c) triangle, irregular shape of circle and triangle d) circle, triangle

    A

17. A regular pentagon prism first placed in such a way its axis is perpendicular to V.P and one edge is parallel to H.P and next this is tilted such that its axis is making some acute angle with V.P. The front view for previous and later one will be ____________________ a) pentagon, pentagon b) rectangle, pentagon c) pentagon, irregular hexagon d) irregular hexagon, pentagon

    C

18. A cylinder first placed in such a way its axis is perpendicular to V.P and next this is tilted such that its axis is making some acute angle with V.P. The front view for previous and later one will be ____________ a) circle, rectangle with circular ends b) rectangle, rectangle c) rectangle with circular ends, rectangle d) circle, rectangle

    A

19. A cylinder first placed in such a way its axis is perpendicular to V.P and next this is tilted such that its axis is making some acute angle with V.P. The top view for previous and later one will be ____________ a) circle, rectangle with circular ends b) rectangle, rectangle c) rectangle with circular ends, rectangle d) circle, rectangle

    B

20. A triangular pyramid is placed such that its axis is perpendicular to V.P and one of its base’s edges is parallel to H.P the front view and top view will be _____________ a) Triangle of base, triangle due to slanting side b) Triangle due to slanting side, triangle of base c) Triangle of base, rhombus d) Rhombus, triangle of base

    A

21. A regular cone having its axis parallel to H.P and perpendicular to V.P at first but then the cone’s axis keeping parallel to H.P and rotated such that its new axis is perpendicular to the previous axis. The front view of the previous and later one is _____________ a) Circle, triangle b) Circle, triangle with circular base c) Triangle, triangle d) Circle, circle

    A

22. A regular cone having its axis parallel to H.P and perpendicular to V.P at first but then the cone’s axis keeping parallel to H.P and rotated such that its new axis is perpendicular to previous axis. The top view of the previous and later one is ______________ a) Circle, triangle b) Circle, triangle with circular base c) Triangle, triangle d) Circle, circle

    C

23. When a solid is placed such that axis is inclined with the H.P and parallel to the V.P. Its projections are drawn in __________ stages. a) 1 b) 4 c) 2 d) 3

    C

24. A regular cone first placed in such a way its axis is perpendicular to H.P and next to this is tilted such that its base is making some acute angle with H.P. The top view for previous and later one will be ____________ a) triangle, triangle b) irregular shape of circle and triangle, triangle c) circle, irregular shape of circle and triangle d) circle, triangle

    C

25. When a solid is placed such that axis is inclined with both the H.P and V.P. Its projections are drawn in __________ stages. a) 1 b) 4 c) 2 d) 3

    D

26. The front views of 1st, 2nd and final stages of square prism, has its axis inclined at 45 degrees with H.P and has an edge of its base on H.P and inclined 30 degrees with V.P while drawing orthographic projections are _______________ a) Rectangle, rectangle, hexagon b) Square, rectangle, rectangle c) Rectangle, rectangle, octagon d) Square, rectangle, hexagon

    A

27. The top views of 1st, 2nd and final stages of square prism, has its axis inclined at 45 degrees with H.P and has an edge of its base on H.P and inclined 30 degrees with V.P while drawing orthographic projections are ______________ a) Rectangle, rectangle, hexagon b) Square, rectangle, rectangle c) Rectangle, rectangle, octagon d) Square, rectangle, hexagon

    B

28. A solid is an object having (A) one dimension (B) two dimensions (C) three dimensions (D) no dimension

    C

29. Axes of which of the following solids is perpendicular to their bases? (A) Oblique solid (B) Right solid (C) Both (A) and ( B) (D) None of the above

    B

30. Which of the following has equal faces? (A) Tetrahedron (B) cube (C) octahedron (D) all of the above

    D

31. Following is (are) solids of revolution. (A) Sphere (B) Cone (C) Cylinder (D) All of the above

    D

32. When the solid is cut by a plane parallel to its base then it is known as (A) Full solid (B) Truncated solid (C) Frustum of solid (D) Half solid

    C

33. When the solid is cut by a plane inclined to its base then it is known as (A) Full solid (B) Truncated solid (C) Frustum of solid (D) Half solid

    B

34. ___ is a kind of polyhedron having two parallel identical faces or bases. (A) Pyramid (B) Prism (C) Solids of revolution (D) All of the above

    B

35. ___ is type of polyhedron having a base and an apex. (A) Prism (B) Solids of revolution (C) Pyramid (D)None of the above

    C

36. A sphere is a solid generated by the revolution of a (A) circle (B) arc (C) semicircle (D) any of the above

    C

37. Which of the following position is not possible in solids (A) Axis of a solid parallel to HP, perpendicular to VP (B) Axis of a solid parallel to VP, perpendicular to HP (C) Axis of a solid parallel to both HP and VP (D) Axis of a solid perpendicular to both HP and VP

    D

38. Top view of a right cylinder, resting on HP on its base, is (A) Circle (B) Ellipse (C) Rectangle (D) Square

    A

39. Front view of a cube resting on HP on one of its faces, and another face parallel of VP, is (A) Rectangle (B) Square (C) Parallelogram (D) Rhombus

    B

40. Projection lines are (A) Continuous thick lines (B) Continuous thin lines (C) Chain thin lines having thick edges (D) Dashed lines

    B

41. Side view of a cone resting on HP on its base rim and having axis parallel to both HP and VP, is (A) point (B) circle (C) ellipse (D) triangle

    B

42. If frustum of a cone is placed on HP on its base, its top view will consist of (A) a point (B) a circle (C) two circles (D) an ellipse and a circle

    C

43. When the line is parallel to both Horizontal Plane (HP) and Vertical Plane (VP), we can get its true length in (A) Front view (B) Top view (C) Both ‘a’ and ‘b’ (D) Side view

    C

44. When the line is parallel to VP and perpendicular to HP, we can get its true length in A) Front view B) Side view C) Both ‘a’ and ‘b’ D) Top view

    C

45. The following method(s) is used to find the true length and true inclination of a line when its front view and top view are given A) Rotation method B) Trapezoidal method C) Auxiliary plane method D) All of the above

    D

46. The front view of a rectangle, when its plane is parallel to HP and perpendicular to VP, is A) Rectangle B) Square C) Line D) Point

    C

47. Which of the following position is not possible for a plane? A) Perpendicular to both HP and VP B) Parallel to both HP and VP C) Perpendicular to HP and parallel to VP D) Perpendicular to VP and parallel to HP

    B

48. The following are the Polyhedron except A) Prism B) Pyramid C) Cube D) Cylinder

    D

49. 23-The following are the Solids of revolution except A) Prism B) Sphere C) Cone D) Cylinder

    A

50. If a solid is cut by a cutting plane parallel to the base of the solid and top part is removed, the remaining part is called A) Frustum of a solid B) Truncated solid C) Oblique solid D) None of the above

    A